Zigong Huarui Filtration Equipment Manufacturing Co., Ltd.

Home > Product display > Water treatment equipment
  1. Automatic Filter
  2. Automatic Filter

Automatic Filter

DLS-series Automatic filter requires vertical installation: the inlet direction is from the bottom (inflow) to the top (outflow), i.e., water flows in low and flows out high. It utilizes Y sewage

  1. Detailed information

DLS-series Automatic filter requires vertical installation: the inlet direction is from the bottom (inflow) to the

 top (outflow), i.e., water flows in low and flows out high. It utilizes Y sewage discharge pipe, so it avoids

 clogging and unreliable filter fineness that the traditional filter has, during the revolution of the filter cylinder.

 This is suitable for water with normal quality.

Technical Parameters:

Design Pressure: 0.6, 1.0, 1.6 Mpa

Pressure Loss: 0.03 MPa

Counter-flushing time: 5min or base don working conditions

Filter Fineness:1.0~5mm, high fineness 30~200μm

Operating Power Supply: 380V50Hz

Preset Timing Range: 0~240 hours or longer:

Flow Rate in chart:

Operating Pressure 0.3 MPa

Filter  Fineness 5 mm

Pressure Loss: 0.02 MPa

Installation Dimensions:

On the drawing, the special sewage discharge location is for generic purpose, so based on the design

the client can request it be equipped along any direction.

When filter fineness, the diameter of the sewage discharge, correspondent dimensions need adjustment.

For other models, please contact the Technology Division.


Powered by MetInfo 5.3.7 ©2008-2020 www.metinfo.cn